51学通信技术论坛

 找回密码
 立即注册
搜索
查看: 3433|回复: 0
打印 上一主题 下一主题

[信令流程] PDN Connectivity Req with handover type [复制链接]

Rank: 7Rank: 7Rank: 7Rank: 7Rank: 7Rank: 7Rank: 7

版主 特殊贡献奖

跳转到指定楼层
楼主
发表于 2013-3-21 16:05:24 |只看该作者 |倒序浏览
一键分享 一键分享
今天查看现场的包,发现有个有趣的组合, PDN Connectivity Req 消息中request type =handover。奇怪了半天。因为同一个MME没看到有切换场景。
后来翻了24301 部分:

“The UE shall set the request type to "handover" when the connectivity to a PDN is established upon handover from a non-3GPP access network and the UE was connected to that PDN before the handover to the 3GPP access network.”


可能这样的还不是经常看到,所以先放上来大家看下。

附件: 你需要登录才可以下载或查看附件。没有帐号?立即注册

点评

admin  是的,规范规定,如果是3GPP内部的切换(例如LTE到WCDMA的切换),那就做个TAU或RAU就可以了,但non-3gpp到3gpp的切换,因为网络差异较大,是需要重新做附着的,附着类型就是handover,正常的附着叫intial感谢分享。  发表于 2013-3-21 20:23:46
人刚我柔谓之走,我顺人背谓之粘。动急则急应,动缓则缓随。虽变化万端, 而理为一贯。
您需要登录后才可以回帖 登录 | 立即注册

站长邮箱|Archiver|51学通信 ( 粤ICP备11025688 )

GMT+8, 2024-6-16 17:38 , Processed in 0.048506 second(s), 14 queries .

Powered by Discuz! X2

© 2001-2011 Comsenz Inc.

回顶部