51学通信技术论坛

 找回密码
 立即注册
搜索
查看: 6352|回复: 5
打印 上一主题 下一主题

请教关于PDP上下文去激活的问题? [复制链接]

Rank: 2Rank: 2

跳转到指定楼层
楼主
发表于 2012-2-23 14:46:32 |显示全部楼层 |倒序浏览
一键分享 一键分享
如果说是MS或者网络主动发起的PDP去激活PDP上下文是不是一定删除?在3G里面如果启用保留机制的话除了RAB释放可以保留PDP上下文以外,对于主动发起的这种去激活会不会保留PDP上下文?请各路大侠指点?不甚感激!

Rank: 2Rank: 2

沙发
发表于 2012-2-24 20:24:36 |显示全部楼层
回复 hycl5410 的帖子

我就是做PS的,对原理不是很熟悉。但是23060里面有个保留流程的描述啊。那这个怎么解释呢?Preservation Procedures

By sending a RAB Release Request or IuRelease Request message to the SGSN, an Iu mode RAN initiates the release ofone or more RABs. The preservation procedure allows the active PDP contextsassociated with the released RABs to be preserved in the CN, and the RABscan then be re-established at a later stage, see clause 9.2.5.2and clause 9.2.3.5.

An Iu mode RAN uses the Iu Release Requestto request release of all RABs of an MS, and the RAB Release Request in othercases.


使用道具 举报

Rank: 2Rank: 2

板凳
发表于 2012-2-24 20:28:45 |显示全部楼层
回复 爱卫生 的帖子

但是协议里面是有的呀。23060里面有这么一段描述;Preservation Procedures

By sending a RAB Release Request or IuRelease Request message to the SGSN, an Iu mode RAN initiates the release ofone or more RABs. The preservation procedure allows the active PDP contextsassociated with the released RABs to be preservedin the CN, and the RABscan then be re-established at a later stage, see clause 9.2.5.2and clause 9.2.3.5.

An Iu mode RAN uses the Iu Release Requestto request release of all RABs of an MS, and the RAB Release Request in othercases.


然后我认为保留的话也有好处呀,至少你下次做业务的时候可能只要重建个RAB就可以了,这样的话流程肯定会更快一点,做业务当然就更快。如果你重新走激活流程的话时间肯定会稍微长一点嘛,以前不是说什么“永远在线”的吗?不就是让用户感觉他好像没有脱离这个这个网络,随时可以进行业务吗?个人见解,爱总再帮我点拨一下。


使用道具 举报

Rank: 2Rank: 2

地板
发表于 2012-2-24 20:34:44 |显示全部楼层
回复 mobileice 的帖子

现网中一般是这样的,但是有时候为了对一些VIP用户会做一些特别的设置来提高用户感知。这个问题尚在讨论中。

使用道具 举报

Rank: 2Rank: 2

5#
发表于 2012-2-25 00:01:03 |显示全部楼层
回复 爱卫生 的帖子

恩,多谢版主的补充。

使用道具 举报

Rank: 2Rank: 2

6#
发表于 2012-2-25 18:02:59 |显示全部楼层
回复 爱卫生 的帖子

赞同你的观点,那我上面的说法是错误的,只是在RAB释放的时候可能去启用保留机制,而不是PDP去激活。如果是去激活的话肯定会删除PDP上下文了是吧。

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

站长邮箱|Archiver|51学通信 ( 粤ICP备11025688 )

GMT+8, 2024-5-11 21:57 , Processed in 0.025518 second(s), 12 queries .

Powered by Discuz! X2

© 2001-2011 Comsenz Inc.

回顶部