51学通信技术论坛

 找回密码
 立即注册
搜索
查看: 20726|回复: 4
打印 上一主题 下一主题

GPRS GTP隧道协议规范     [复制链接]

Rank: 6Rank: 6Rank: 6Rank: 6Rank: 6Rank: 6

特殊贡献奖

楼主
发表于 2011-10-5 09:58:55 |显示全部楼层
多谢楼主,待仔细看后,再做“意见”,呵呵

使用道具 举报

Rank: 6Rank: 6Rank: 6Rank: 6Rank: 6Rank: 6

特殊贡献奖

沙发
发表于 2011-10-5 14:16:30 |显示全部楼层
爱楼主,你好,请教个问题:
在path managermnet 里面,echo response 里面有段话:If the sending GSN is a GGSN and the receiving GSN is an SGSN, the SGSN shall consider all PDP contexts using the GGSN as inactive. For further actions of the SGSN refer to 3GPP TS 23.007 [3].
If the sending GSN is an SGSN and the receiving GSN is a GGSN, the GGSN shall consider all PDP contexts using the SGSN as inactive. For further actions of the GGSN refer to 3GPP TS 23.007 [3].
这段话是啥意思,为啥要这样呢?

使用道具 举报

Rank: 6Rank: 6Rank: 6Rank: 6Rank: 6Rank: 6

特殊贡献奖

板凳
发表于 2011-10-5 19:23:05 |显示全部楼层
爱楼主,你好,还要麻烦一个问题:
在create pdp request里面: After sending the Create PDP Context Request message, the SGSN marks the PDP context as "waiting for response". In this state the SGSN shall accept G-PDUs from the GGSN but shall not send these G-PDUs to the MS。
意思是: 在SGSN里的PDP还处于等待状态(只差一个pdp的response了),如果ggsn那边该做的工作都已经完成了(比如计费的也开始了等),这个时候流向这个MS的外部PDN的数据是可以进来的,是可以被sgsn所收到的,只是sgsn这个时候还不能发给MS罢了。换句话说,创建PDP可以说基本成功了,因为都可以支持G-PDU的下行了。
我的理解,对吗? 请爱楼主,给看看。

使用道具 举报

Rank: 6Rank: 6Rank: 6Rank: 6Rank: 6Rank: 6

特殊贡献奖

地板
发表于 2011-10-7 21:09:16 |显示全部楼层
哦,多谢楼主啊,多谢多谢

使用道具 举报

Rank: 6Rank: 6Rank: 6Rank: 6Rank: 6Rank: 6

特殊贡献奖

5#
发表于 2011-10-8 20:23:52 |显示全部楼层
哦,多谢爱老师,指点,多谢{:soso_e133:},这个我还真不知道,我上周才算是学会看规范,正在看gtp的那个中文版(从gprshome上下的),对照着英文版。

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

站长邮箱|Archiver|51学通信 ( 粤ICP备11025688 )

GMT+8, 2024-5-22 03:00 , Processed in 0.183915 second(s), 20 queries .

Powered by Discuz! X2

© 2001-2011 Comsenz Inc.

回顶部