- 在线时间
- 329 小时
- 最后登录
- 2015-9-9
- 威望
- 116
- 金钱
- 23093
- 贡献
- 67
- 注册时间
- 2012-2-23
- 阅读权限
- 150
- 主题
- 8
- 帖子
- 491
- 分享
- 0
- 精华
- 0
- 积分
- 23883
- 相册
- 0
|
Information element name Mapping to Diameter AVP Cat. Description
IMSI
User-Name (See IETF RFC 3588 [4]) M This information element shall contain the user IMSI, formatted according to 3GPP TS 23.003 [3], clause 2.2.
Supported Features
(See 3GPP TS 29.229 [9]) Supported-Features O If present, this information element shall contain the list of features supported by the origin host.
Terminal Information
(See 7.3.3) Terminal-Information O This information element shall contain information about the user’s mobile equipment. Within this Information Element, only the IMEI and the Software-Version AVPs shall be used on the S6a/S6d interface.
ULR Flags
(See 7.3.7) ULR-Flags M This Information Element contains a bit mask. See 7.3.7 for the meaning of the bits.
Visited PLMN Id
(See 7.3.9) Visited-PLMN-Id M This IE shall contain the MCC and the MNC, see 3GPP TS 23.003[3]. It may be used to apply roaming based features.
RAT Type
(See 7.3.13) RAT-Type M This Information Element contains the radio access type the UE is using. See section 7.3.13 for details.
SGSN number
(See 7.3.102) SGSN-Number C This Information Element contains the ISDN number of the SGSN, see 3GPP TS 23.003 [3]. It shall be present when the message is sent on the S6d interface and the SGSN supports LCS or SMS functionalities.
7.3.7 ULR-Flags
0 Single-Registration-Indication This bit, when set, indicates that the HSS shall send Cancel Location to the SGSN. An SGSN shall not set this bit when sending ULR.
TS 29.272 |
|